Xerox 5750 Getting Started Manual page 43

8. Scroll down and double click on the Document Options folder, then scroll down and
double click on the Printer Features folder.
9. Scroll down and select SpotMatch.
a. If the M Series server is a model M210 or M310, set the SpotMatch option to
disabled. This option must be set to disabled because the M210 and M310 do not
support the SpotMatch feature.
b. If the M Series server is a model M410, set SpotMatch to the desired option
(disabled or enabled).
The installation is now complete and you can start sending print jobs to the color server. The
color server PPD file ships with a set of default values. You can use these defaults, specify new
defaults (which will apply to all your print jobs), or select new values on a job-by-job basis. For
more information, refer to the Splash M Series User's Manual.
If this is the first workstation you have set up for the Splash M Series Color Server, go to
Setting the Administrator Password for the Server on page 44 to set the password for the
server.
0015647-0001 February 18, 1999
Figure 30: Advanced Tab for Document Default Properties
Getting Started Guide
page-43