Advertisement
Manual
Introduction
Thank you for purchasing the LINDY 4 Port DVI Audio/Video Switch including infra-red remote
control. This switch allows routing of multiple DVI equipped devices (such as PC's or DVD
players) to a single DVI-D plasma or LCD screen.
The switch supports DVI-D signal resolutions up to 1920x1200 and HDTV up to 1080p. With the
included Infra-red remote control, you can switch between the four video and audio sources
independently from the comfort of your chair. The internal EEPROM stores the last know
configuration when the power is turned off.
Package Contents
4 Port DVI Audio/Video Switch
•
Infra-Red Remote Control
•
Audio Extension Cable x 5 (15cm)
•
This Manual
•
Specifications
Input Ports: 4 DVI-D Ports
•
Output Ports: DVI-D
•
Device Selection: Push Button or Remote Control
•
Single Link Range: WUXGA 1920 x 1200@60Hz up to 1080p
•
PSU: 5V DC, 1A (Centre Positive)
•
Aluminium Enclosure
•
Dimensions: 162 x 58 x 28mm (WxDxH)
•
Installation
Note: Please make sure all devices are turned off before installation starts
1
Connect your DVI display to the DVI output with a DVI-D cable
2
Connect the 4 DVI devices to the input port with a DVI-D cable
3
Plug in the 5V power supply
4
Power on all the devices
5
Using the push button or the remote, select the source you want to view
Connectors
1.
Video channel LED indicator: the LED will show which video channel is selected
2.
Audio channel LED indicator: the LED will show which audio channel is selected
3.
Power & AV sync button: press this button for 2 seconds to power on/off
4.
4 x Video input ports: connect your source devices to these ports
5.
4 x Audio input ports: connect your audio source to these ports
6.
Video output port: connect this to your display
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH
Advertisement
