Model Specifications - Motorola iDEN i530 Field Service Manual

MODEL SPECIFICATIONS

GENERAL
FCC Designation: AZ489FT5825 Receiver Type:
Operational Modes:
800 MHz Band only:
Temperature Range:
Operating –10°C to +60°C
Storage (w/o battery) –40°C to +85°C
Power Supply:
Battery Type
Recommended
Battery:
Battery Voltage:
Nominal
Range
Dimensions (HxWxD):
Phone only 94 x 31 x 54 mm
Weight:
(without battery)
viii
MODEL SPECIFICATIONS
Phone Frequency Range:
Private
Group
Circuit Data
Packet Data
Channel Spacing:
Frequency Stability:
Lithium Ion Referenced to base
station
SNN5704 Sensitivity (10%) BER:
SNN5705
(M-16 QAM)
Spurious Response
Immunity:
3.6 Vdc
3.0 to 4.2 Vdc
Spurious Radiation:
Above 960 MHz
216–960 MHz
88–216 MHz
30–88 MHz
Audio Output Power
122 g and Speakerphone
Rating:
(Private and Group
Modes only) into
8 ohms at maximum
volume (nominal
battery voltage)
Distortion at Rated
Audio:
Electrical
Acoustical
Specifications subject to change without notice.
RECEIVER
Superheterodyne Transmitter Type:
851-870 MHz
935-940 MHz
25 kHz Emission Designator:
0.4 ppm
–111 dBm
-51 dBm
<500 µV/m.
<200 µV/m.
<150 µV/m.
<100 µV/m.
500 mW
5% Max.
10% Max.
TRANSMITTER
Single Conversion
Frequency Range:
Modulation Types:
Frequency Stability:
Referenced to base
station
Spurious Emissions:
Conducted
Radiated
RF Pulse Avg Power:
(dynamically
adjusted) –11 to +28 dBm
Adjacent Channel
Power:
(at ±25 kHz in 18 kHz
BW)
68P80400P65-O
806-825 MHz
896-901 MHz
18K3D7W
Quad 16QAM
Quad 64QAM
Quad QPSK
0.4 ppm
–13 dBm
–13 dBm
-55 dBc