Display Screens - Motorola iDEN i530 Field Service Manual

BASIC LEVEL TEST MODES AND PROCEDURES: Test Modes
6.1.2

Display Screens

Display screens on the i530 unit provide information that is useful for troubleshooting purposes.
These displays appear only when the unit is placed in debug mode (see "Entering Debug Mode on
page 6-1).
To navigate through the screens, press the appropriate scroll key to highlight the desired screen, and
then press the View option key. To select a choice within a screen, press the Select option key. To
exit from a choice or screen, press the Back option key.
Table 6-1. Display Screens
Name
Unit Info
• Phone Model
• CP Ver
• USR Ver
• CSD Ver
• Software
Tegic
Flash Packs
Total Usage
Tx Status
Rx Status
N6:1 Intrcnct
GPS
6-2
Description
Displays the unit model number and product sub ID, such as i530 and A.
Displays the Codeplug Version. The first half of the line displays the codeplug structure and
default version; the second half displays the codeplug bandmap.
Version of carrier specific modification to the product code plug. Programmed at shipment.
Displays the Customer Static Data version. The first number indicates the customer. The
second number indicates the structure revision. The third number indicates the data revision.
Displays the current software version programmed in the unit, as well as the software type
(RSS model) and build date.
Text 9 code version/LDB version.
Version of the preferred language: French, Spanish, Hebrew, Korean, or Portugese and the
associated Font Pack.
Displays the number of minutes the unit has used a traffic (dispatch and interconnect) or a
Packet Data channel since manufacture.
First line displays the SQE/Carrier data: Outbound signal quality, Frequency band, current
carrier code, and color.
Second line displays the Tx power of the unit which is the current adjusted Transmit Output
Power.
Third line displays current temperature and the difference between the current temperature
and temperature 2 seconds ago.
First line displays the SQE/Carrier data: Inbound signal quality, Frequency band, current
carrier code, and color.
Second line displays the Rx power of the unit which is the current adjusted Received Input
Power.
Third line displays the Channel Type for inbound transmissions.
Parameter details for the 6:1 Interconnect Feature enabling transmission of RF-originated
messages through the telephone system.
Line 1 shows MS, the Mobile Subscriber's ability to support 6:1 Interconnect and FNE, the
Fixed Network Equipment's ability to support 6:1 Interconnect respectively. Numbers 0 or
1 indicate No or Yes respectively.
Line 2 shows I, Interleave of the current channel, O, Offset of the current channel, and S,
Sub-slot of the current channel. Values for Interleave are 1 – 24, Offset values are 0 – 23,
and Sub-slot can be A, B or N.
Line 3 shows ECC, Extended Color Code and PO, Primary Control CHannel Offset of the
current carrier.
Values for ECC are 0 – 16. Values for PCCH Offset are 0 - 11.
During Trace Mode, radio activity such as interconnect, dispatch call, packet data session,
registration, or location update information will automatically update every 2 seconds.
Displays the GPS location, time info, assist, navigation, summary, GPS version.
68P80400P65-O