Advertisement
1
Unsnap the cable covers from the display.
2
Connect the power adapter. Make additional connections as needed. Connect Edge Connect peripherals
to edge Micro USB ports by removing covers as shown.
Edge MicroUSB
Cover
Headset
USB-C
Serial
Ethernet
USB 3.0 Port (4x)
Edge MicroUSB
Edge MicroUSB
Cover
Power In
Edge MicroUSB
Cover
3
Route cables through guide fingers in display. Tie down cables using included Cable Ties at two loca-
tions shown.
Reinstall the cable covers by snapping into the display and tightening the two screws. Mount on stand
4
or wall using 75mm VESA mounting interface (15.6" model) or 100mm VESA mounting interface (other
models) using included M4x12 screws. Press the power button to turn on the Touchcomputer.
Cover
See detailed user guide at www.elotouch.com for additional information.
Cable Tiedowns
(2x)
Power Button
Advertisement
