5 Specifications
•
Trio Specifications
•
External Devices Specifications
5.1 Trio Specifications
Description
Input Power Voltage
Input AC Power
Relays
Note: Running relays at the above current levels provides between 50,000 –
100,000 switching operations.
Analog Inputs
Analog Output
Digital Inputs
Communication
Operating and Storage
Temperature Range
Environmental
Specifications
Enclosure
Dimensions (H/W/D)
Fuses
Certification
Disconnection device/overcurrent protection: In the building installation, use a
•
certified 2-pole circuit breaker rated 10A, certified in accordance with the IEC
standard 60947-2 (in the US and Canada use a Listed Brach Circuit protective
circuit breaker). This step is required to provide overcurrent protection and mains
Specification
•
100 – 240 VAC
•
50/60 Hz
0.75A (at full load (meaning Wi-Fi, internet, cell phone,
and 20 relays ON)
1 Amp. Up to 60% of the relays can operate at any given
time.
0 – 3.3 Volts
0 - 10 Volts; maximum load: 20 mA
3.3 Volts, 1.5 mA, dry contact
•
LAN – Standard 10/100 BaseT
•
Expansion – RS-485: 115 Kbps, 8 bit, even parity
-10° to +50° C (+14° to +125° F)
•
Altitude: -400 m to 2000 m
•
Relative Humidity: 20% - 70%
•
Main supply voltage fluctuation up to 5%
•
Overvoltage category II
•
Water and dust tight
•
Indoor use only
403 x 324 x 141 mm/16 x 13 x 5.6 inches
Fuse F2 on PS card: 3.15A, 250V
© Munters AB, 2020
38