In-Call User Alert; Emergency Operation - Motorola APX 8000 User Manual

Radio displays the playback status.
NOTE:
Received call overwrites the ongoing record playback. User can short press the
programmable button within three seconds to continue the playback and ignore the
receiving call.
User can short press the programmable button to trigger playback when the radio is
receiving call to overwrite the receiving call.
Playback can be halted by any tone and button press except for specific buttons. Check
with your dealer or system administrator for more information.
7.9

In-Call User Alert

This feature allows the radio to remain muted to affiliated talkgroup calls or dispatch calls while
operating on the current Trunking Personality or conventional channel respectively.
Group and individual Pages unmute the radio for the alert tone to sound. The radio also unmutes to
individual radio-to-radio calls. This feature is very useful when a radio-user prefers not to hear affiliated
talkgroup or dispatch calls traffic, but needs-to remain in radio contact. For an In-Call User Alert
enabled channel, the Voice Mute button-press or the Voice Mute menu-selection allows the radio-user
to toggle on and off Voice Mute functionality.
7.10

Emergency Operation

The Emergency feature is used to indicate a critical situation. An emergency signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call
• Emergency Alarm with Emergency Call
3
• Silent Emergency Alarm
One channel supports only one Emergency mode. The radio responds differently when pressing the
programmed Emergency button in each channel.
Only one Emergency mode can be assigned to the Emergency button.
Your radio is also programmed to operate in one of the following conditions:
Tactical/Non-Revert
The radio sends an emergency alarm and/or makes an emergency call on the current channel.
Non-Tactical/Revert for Conventional System
The radio reverts to the programmed emergency channel to send an alarm and/or make an
emergency call.
Non-Tactical/Revert for Trunking System
The radio reverts to the programmed emergency talkgroup (trunking system) or channel
(conventional system) to send an alarm and/or make an emergency call.
Fall Alert (Man Down) is an alternate way to activate the Emergency feature. For more information, see
Man Down (Fall Alert) on page
3
This feature allows you to send an Emergency Alarm to the system without triggering any audio or
visual indicators.
81.
MN001425A01-AW
Chapter 7 : Advanced Features
71