Manually Refreshing The Remote Emergency List; Receiving Remote Emergency; Filtering Remote Emergency Contacts; Sending An Emergency Alarm - Motorola APX 4000XH User Manual

● Imbalance Coverage
If your radio receives acknowledgment, your radio displays a positive notification.
If your radio does not receive acknowledgment from the target radio, your radio displays a negative
notification.
7.10.5.3

Manually Refreshing the Remote Emergency List

Procedure:
1. Press the programmed Remote Emergency button.
2. To refresh the remote emergency list, press Rfsh.
Result: Your radio displays List refreshed followed by the updated remote emergency list..
7.10.5.4

Receiving Remote Emergency

The remote emergency will only be launched if your radio has the emergency enabled. The receiving radio
displays Emergency.
Procedure:
To exit the emergency operation, press and hold the programmed Emergency button.
7.10.5.5

Filtering Remote Emergency Contacts

This feature allows you to filter contacts.
Procedure:
1. Press the programmed Remote Emergency button.
2. Press the Fltr menu item button.
Result:
Your radio displays the filtered call list.
7.10.6

Sending an Emergency Alarm

When and where to use: This feature allows you to send a data transmission, which identifies the radio
sending the emergency, to the dispatcher.
NOTE: The default timer of Emergency button press to activate Emergency is 50 milliseconds. This
timer is programmable from 50–6200 milliseconds by a qualified technician.
Procedure:
Press the preprogrammed Emergency button.
One of the following scenarios occurs:
● The display shows Emergency and the current zone or channel. You hear a short medium-pitched
tone and the LED blinks red momentarily.
MN001824A01-AT
Chapter 7: Advanced Features
71