Front Panel Programming; Initiating The Fpp Feature - Motorola APX 4000XH User Manual

Table of Contents

Advertisement

MN001824A01-AT
Chapter 7: Advanced Features
Press the Menu Select button directly below Cncl to return to the previous screen.
7.25.18

Front Panel Programming

You are able to customize certain feature parameters in Front Panel Programming (FPP) to enhance the use
of your radio.
The radio can be programmed in two ways:
Front Panel Programming (FPP) using the front panel controls of the radio.
Customer Programming Software (CPS), with the radio connected to a PC computer.
There are two methods to program a channel within a zone. Either:
Select the zone and channel through the radio interface, and then initiate the FPP feature. Or,
Initiate the FPP feature, and then select the zone and channel.
NOTE: When any of the Rx parameters such as Rx frequency, Rx PL, Rx DPL, and Rx NAC is
changed, FPP automatically copies these Rx parameter values to the equivalent Direct operation (also
known as Talkaround operation) parameters. If you use FPP to change the Rx frequency to be the
same as the Tx frequency and subsequently use the CPS to read then write to the radio, Direct/
Talkaround mode will operate differently from when a receive channel parameter value is changed
through FPP. Refer to the CPS help files for a description of Direct/ Talkaround Mode operation, in
respect to a CPS write to the radio.
7.25.18.1

Initiating the FPP Feature

Prerequisites: Before using this feature, you should:
Familiarize yourself with the your radio.
Remove the universal connector seal or any other accessories if it is attached to the radio.
Procedure:
1. Press
or
to FPP.
2. Press the Menu Select button directly below FPP.
If you are going to program zones which are not password protected (only supported in Federal
FPP), go to
step
If you are going to program a set of zones, of which one or more are password protected, go to
step
3. The radio displays Password.
3. Key in the password.
The radio displays Password: ********.
4. Press OK.
The radio displays Radio Param and Zn/Ch Param.
128
4.

Advertisement

Table of Contents
loading

Table of Contents