Table of Contents
Advertisement
MN001824A01-AT
Chapter 7: Advanced Features
7.12.3
Exiting Fall Alert
Procedure:
To exit Fall Alert mode, press Clr.
7.12.4
Reinitiating Fall Alert
Procedure:
To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions:
●
Return the radio to a vertical position.
●
If motion sensitivity is enabled, shake the radio.
7.13
Automatic Registration Service
Automatic Registration Service (ARS) provides an automated data application registration for your radio.
When you turn on the radio, the device automatically registers with the server. Data applications within the
fixed network determine the presence of a device on the system and send data to the device.
The ARS consists of the following mode:
●
ARS Server Mode (Default mode)
●
ARS Non-server Mode
7.13.1
Selecting or Changing the ARS Mode
When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the methods
is the same. You can use the options interchangeably depending on your preference and the programmed
functions.
Procedure:
●
Selecting or Changing the ARS mode using the 16-Position Select knob:
a. Once the zone you want is displayed, turn the preprogrammed 16-Position Select knob to the
desired mode.
●
Selecting or Changing the ARS mode using the radio menu:
a.
or
to Chan .
b. Press the Menu Select button directly below Chan .
The display shows the current channel name.
c.
or
to the required channel or mode.
d. Press Sel to confirm the displayed channel.
One of the following scenarios occur:
○
In ARS Server Mode, the display shows the zone and ARS server channel.
76
Advertisement
Table of Contents
