Table of Contents
Advertisement
MN001824A01-AT
Chapter 3: Radio Controls
Bluetooth Inquiry On/Off
Enables the Bluetooth Search feature.
Bluetooth Discoverable On/Off
Enables the visibility of your radio to other Bluetooth devices.
Call Alert
Allows your radio to function like a pager, or to verify if a radio is active on the system.
Call Response
Allows you to answer a private call.
Channel
Selects a channel.
Contacts
Allows you to access the Contacts menu.
Dynamic ID (Conventional Only)
Allows you to edit the ASTRO Individual ID and/or MDC Primary ID of the radio.
NOTE:
●
If the Dynamic ID menu key is not pre-programmed in the radio, use dongle to display the menu
key. Press the menu key and enter the password to view or edit the ASTRO Individual ID and/or
MDC Primary ID of the radio.
●
If the password is not pre-programmed, press the menu key to directly view or edit the ASTRO
Individual ID and/or MDC Primary ID of the radio.
Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for a Priority-One channel) to temporarily replace the Priority-
Two channel.
Emergency
Depending on the programming, initiates or cancels an emergency alarm or call.
In-Call User Alert
Allows the radio to remain muted to affiliated talkgroup calls while operating on the current Trunking
Personality or conventional channel.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Location
Displays the current location (latitude, longitude, time, and date), and also the distance and bearing to
another location, or toggles GPS/Location between on and off.
Fall Alert Clear
Allows you to clear the Fall Alert mode alarm and exit Fall Alert feature.
Message
Allows you to access the message list.
Mode Select (MS01– MS13)
Long press – Saves the current zone and channel to one of the Mode Select menus when the
Preconfigurable Preset Zone and Channel field is enabled.
Short press – Changes to the preset Mode Select zone and channel.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Multiple Private Line (Conventional Only)
Allows you to access the Multiple Private Line lists.
24
Advertisement
Table of Contents
