Table of Contents
Advertisement
MN001824A01-AT
Chapter 7: Advanced Features
Table 6: MPL Selection Mode
Selection Mode
Dynamic
Static
7.1.8.1
Selecting Multiple Private Line
Prerequisites: Ensure that this feature is enabled in the codeplug and the radio is in Conventional Mode.
Procedure:
1. Perform one of the following actions:
●
Press the programmable Multiple Private Line (MPL) Side button.
●
From the Home screen, tap
2. Tap the required MPL.
The Radio Control Widget displays the selected MPL.
7.2
Remote Monitor
This feature allows the system administrator to turn on the microphone of a targeted radio with a subscriber
alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in Customer
Programming Software (CPS) to route the audio to the radio internal microphone, wired Remote Speaker
Microphone (RSM), or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible activity
surrounding the targeted radio.
7.3
Contacts
This feature provides address-book capabilities on your radio. Each entry corresponds to an alias (name) and
ID (number) that you use to initiate a call. Contact entries are alphabetically sorted according to the entry
alias.
Each entry, depending on context (conventional, trunking, or phone), associates with one to five IDs
according to the following types of calls:
●
Phone Call
●
Private Call
●
Selective Call
●
Call Alert
54
Description
The MPL List selection/functionality is automatically updated (and
active on the radio current channel) as users scroll through the avail-
able MPL List selections.
While users are scrolling through the radio available MPL List selec-
tions, MPL functionality does not change until a new MPL List is
manually selected.
More.
Advertisement
Table of Contents
