Using The Time-Out Timer; Time And Date Setup; Editing The Time And Date - Motorola APX 4000XH User Manual

a. To turn the feature off or on, press the preprogrammed Voice Mute button.
● Turning Voice Mute on or off using the radio menu:
a. or to VMut.
b. Press the Menu Select button directly below VMut.
Result: The display shows Voice mute off, and you hear a short tone, indicating that the feature is
disabled or the display shows Voice mute on, and you hear a short tone, indicating that the feature is
enabled.
7.25.9

Using the Time-Out Timer

When and where to use: This feature turns off the transmitter of your radio. You cannot transmit longer than
the preset timer setting.
If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be preprogrammed from 15 to 465 seconds, in 15-second
intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician.
NOTE: You hear a brief, low-pitched, warning tone four seconds before the transmission times out.
Procedure:
1. Hold down the PTT button longer than the preprogrammed time.
You hear a continuous talk prohibit tone. The transmission is cut off and the LED goes out.
2. Release the PTT button.
The timer resets.
3. To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up solid red.
7.25.10

Time and Date Setup

The time setting is a 12-hour clock. The display shows 12:00AM. The default setting for the domestic date
shows MDY.
For more information, contact your system administrator.
7.25.10.1

Editing the Time and Date

Procedure:
1. or to Clck.
2. Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3. Press the Menu Select button directly below Edit.
The first item blinks.
MN001824A01-AT
Chapter 7: Advanced Features
121