MN009203A01-AD
Chapter 8 : Emergency Operation
8.5.2
Manually Refreshing the Remote Emergency List
Procedure:
1 Press the programmed Remote Emergency button.
2 To refresh the remote emergency list, press Rfsh.
Your radio displays List refreshed followed by the updated remote emergency list..
8.5.3
Receiving Remote Emergency
The remote emergency will only be launched if your radio has the emergency enabled. The receiving
radio displays Emergency.
Procedure:
To exit the emergency operation, press and hold the programmed Top (Orange) button.
8.6
Emergency Keep-Alive
This feature prevents the radio from being turned off when it is in Emergency mode. If this feature is
enabled, you are required to exit Emergency mode before turning off your radio.
8.7
Emergency Beacon
When the radio is in Emergency mode, the Emergency Beacon feature transmits Bluetooth Low
Energy (BTLE) signals and other Emergency information to nearby radios.
Contact your system administrator for more information.
8.7.1
Sending Emergency Beacons
The following method allows you to transmit the beacon.
Procedure:
Press the programmed Top (Orange) button.
8.7.2
Receiving Emergency Beacons
When you receive emergency beacon, the display shows Beacon Received, the transmitting radio
ID, or alias.
Procedure:
1 Perform one of the following actions:
•
To view the beacon list, press Details.
•
To dismiss the beacon, press Dismiss.
NOTE: If there are multiple beacons, the radio displays the recent beacon received.
54