Table of Contents
Advertisement
MN001824A01-AT
Chapter 7: Advanced Features
If you access a zone or channel that has been reserved as a dynamically regrouped mode for other users,
you hear an invalid tone.
7.1.5.1
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-regrouping
channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
7.1.5.2
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Perform one of the following actions:
●
Press the preprogrammed Reprogram Request button to send a reprogram request to the
dispatcher.
●
or
to Rpgm then press the Menu Select button directly below Rpgm to send reprogram request to
the dispatcher.
The display shows Reprogram Rqst and Please wait.
Result:
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows Ack
received and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-pitched
alert tone and the display shows No acknowledge. Try again or press
screen.
7.1.6
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used channels
for conventional or trunking.
NOTE: Your radio must be programmed for you to use this feature. At least one zone in the radio must
be a nondynamic zone.
50
to cancel and return to the Home
Advertisement
Table of Contents
