Dynamic Regrouping (Trunking Only); Classification Of Regrouped Radios; Requesting A Reprogram (Trunking Only) - Motorola APX 8000 User Manual

MN001425A01-AW
Chapter 7 : Advanced Features
assigned Priority Talkgroup.Priority Dispatch is not available during Emergency operations. Scan
feature is suspended when Priority Dispatch is initiated.
Prerequisites: Dispatch console that supports this feature must be preprogrammed to use this feature.
Check with your dealer or system administrator for more information on dispatch console supporting
this feature.
Procedure:
1 Press the preprogrammed Priority Dispatch button.
A tone sounds and the radio enters Priority Dispatch mode. The radio exits this mode when the
Priority Dispatch Time Out Timer expires.
2 Before the Priority Dispatch Time Out Timer expires, press and hold the PTT button to transmit.
The display shows the Priority Talkgroup alias.
3 Release the PTT button to listen.
The radio exits Priority Dispatch mode, returns to its original talkgroup, and displays the home
channel alias.
7.2.5

Dynamic Regrouping (Trunking Only)

This feature allows the dispatcher to temporarily reassign selected radios to a particular channel to
communicate with each other.
When your radio is dynamically regrouped, it receives a dynamic regrouping command and
automatically switches to the dynamically regrouped channel. You hear a tone and the display shows
the name of the dynamically regrouped channel.
When the dispatcher cancels dynamic regrouping, the radio automatically returns to the previous zone
and channel.
If you access a zone or channel that has been reserved as a dynamically regrouped mode for other
users, you hear an invalid tone.
7.2.5.1

Classification of Regrouped Radios

The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-
regrouping channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
7.2.5.2

Requesting a Reprogram (Trunking Only)

This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Perform one of the following actions:
54