HP 8920A Programmer's Manual page 583

Error −202
Error −210
Error −211
Error −212
Error −213
Error −214
Error −215
Error −220
Settings lost due to rtl
Indicates that a setting associated with a hard local control (see IEEE 488.2, 5.6.1.5) was
lost when the device changed to LOCS from REMS or to LWLS from RWLS.
Trigger error
Trigger ignored
Indicates that a GET, *TRG, or triggering signal was received and recognized by the
device but was ignored because of device timing considerations. For example, the device
was not ready to respond.
Arm ignored
Indicates that an arming signal was received and recognized by the device but was
ignored.
Init ignored
Indicates that a request for a measurement initiation was ignored as another measurement
was already in progress.
Trigger deadlock
Indicates that the trigger source for the initiation of a measurement is set to GET and
subsequent measurement query is received. The measurement cannot be started until a
GET is received, but the GET would cause an INTERRUPTED error.
Arm deadlock
Indicates that the arm source for the initiation of a measurement is set to GET and
subsequent measurement query is received. The measurement cannot be started until a
GET is received, but the GET would cause an INTERRUPTED error.
Parameter error
Indicates that a program data element related error occurred.
583