HP 8920A Programmer's Manual page 397

Rf communications test set

Hide thumbs Also See for 8920A:

Table of Contents

Setting Up Function Keys In Microsoft Windows Terminal

Windows Terminal seems to work best when a mouse is used to access the function keys, not

the keyboard. Also, scrolling a program works best when the Terminal window display is

Setting Up Function Keys in HP AdvanceLink

Method #2. Developing Programs on the Test Set Using the IBASIC EDIT Mode

When in the TERMINAL mode, click on Settings, then Function Keys. ^[ is

ESCAPE in Windows Terminal. See

From the Main (highest level) screen, set up the 8 softkeys as follows:

1. Display User Definition screens by pressing Ctrl F9.

2. Enter all the LABEL titles for K1 through K8.

3. Activate the "Display Function" feature by pressing softkey F7.

4. Now you can enter the escape codes for each edit command aligned with the soft

key definitions you just entered. With the Display Functions key pressed, when you

press the escape key, a left arrow will be displayed.

Once you have set up all 8 keys, you activate them by pressing Shift F12. To deactivate

your user defined softkeys, press F12.

(- is ESCAPE in HP AdvanceLink. See

Chapter 7, IBASIC Controller

for the escape codes.

table 42 on page 398

for the escape codes.