HP 8920A Programmer's Manual page 463

Amplitude
Called Number:
This field is used to set the output power of the Test Set's transmitter (that is, the
output power of the Test Set's RF Generator).
The :AMPLitude command is used to control this field.
Refer to the "Real Number Setting Syntax" section of the for detailed information
on the various parameters which can be used with the :AMPLitude command.
To query the current setting of the amplitude field use the :AMPLitude?
command.
Syntax
:AMPLitude <real number> <units>
:AMPlitude?
Example
OUTPUT 714;"CALLP:AMPL -50 DBM"
OUTPUT 714;"CALLP:AMPL?"
ENTER 714;Ampl_val$
This information string displays the called phone number, in decimal form,
received from the mobile station on the reverse control channel when the mobile
station originates a call. The
field is set to
Display
decoded when the mobile originates a call.
Refer to the
Display field description, on page 467
read data displayed in the upper right hand portion of the
Chapter 8, Programming The Call Processing Subsystem
Programming The CALL CONTROL Screen
Called Number:
and a reverse control channel message has been
Data
field is only displayed when the
, for information on how to
CALL CONTROL
screen.
463