HP 8920A Programmer's Manual page 37

Table 2 RX TEST Screen and TX TEST Screen Priority Field Preset Values
2. When entering the TX TEST screen,
a. The AF Anl In field, the De-Emphasis field, the Detector field and the
AF Analyzer Measurement field (measurement displayed in upper, right portion
of CRT display) are,
• set to their preset values upon entering the screen for the first time since
power-up, OR
• set to their preset values if the PRESET key is selected, OR
• set to the last setting made while in the screen
b. The AF Analyzer AF Anl In, De-Emphasis and Detector fields are,
• set to their preset values whenever entering the screen, OR
• set to their preset values if the PRESET key is selected
RX TEST
Priority
Screen Preset
Field
Value
−80 dBm
RF Gen
Amplitude
AFGen1 To FM
AF Anl In Audio In
Detector RMS
De-emphasis Off
AF Analyzer SINAD
Measurement
Field Hidden TX TEST
On RX TEST Screen Preset
Screen Value
No Off
No Audio Out
Yes FM Demod
Pk ± Max
Yes
750 µs
Yes
No Audio Freq
Chapter 1, Using HP-IB
Getting Started
Field
Hidden On
TX TEST
Screen
Yes
Yes
No
No
No
No
37