Table of Contents
Advertisement
Citigo 2012 ➤, Citigo-e iV 2020 ➤, Enyaq 2021 ➤, Enyaq Coupe 2021 ➤, Fabia 2000 ...
WARNING
Danger of injury!
Observe the warning instructions and safety precautions
when working on the battery
precautions when working on the battery", page 4
– Disconnect battery earth strap ⇒ Electrical System; Rep.
gr. 27.
– Unscrew the cap nut and remove the cable eye from the
screwed connection.
– Check the cable eye for corrosion, contamination, damage
etc.
– Select the appropriate adapter and the corresponding grind‐
ing pad.
Note
The grinding block can also be used as an alternative.
Caution
Carefully clean the cable eye so that the tin layer is not
excessively worn off.
An intermediate visual inspection of the cleaned surface is
required during the cleaning process, because of the differ‐
ent thicknesses of the tin layers.
If the tin layer is severely worn off so that the underlying
copper is revealed, increased galvanic corrosion effects can
occur.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
– Position a suitable adapter on the cable eye and grind off
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
the corrosion and contaminations with rotary movements.
Continuously check the cleaned surface.
Electrical System - general notes - Edition 12.2021
⇒ i1.3 nstructions and safety
.
6. Contact surface cleaning set VAS 6410
105
Advertisement
Table of Contents
