Contact Surface Cleaning Set Vas 6410; Use Contact Surface Cleaning Set Vas 6410; Repairing The Cable Eyes - Skoda Citigo 2012 Workshop Manual

Citigo 2012 ➤, Citigo-e iV 2020 ➤, Enyaq 2021 ➤, Enyaq Coupe 2021 ➤, Fabia 2000 ...
Electrical System - general notes - Edition 12.2021
6 Contact surface cleaning set -VAS
6410-
⇒ c6.1 ontact surface cleaning setVAS 6410", page 104
⇒ t6.2 he cable eyes", page 104
⇒ s6.3 crewed connections", page 106
⇒ t6.4 he battery pole terminals and battery poles", page 108
⇒ 6.5 , page 109
6.1 Use contact surface cleaning set -VAS
6410-
It is possible to carry out repair work in the area of the contact
transmitters on the wiring looms for screwed connections in the
high current circuit as well as when connecting the battery using
the contact surface cleaning set -VAS 6410- (starter and charge
current, earth cables, battery pole terminals and battery poles).
Note
The illustrations for the repair work can only be seen as an
example.
Contact surface cleaning set -VAS 6410-
6.2

Repairing the cable eyes

Note
It is not permitted to use rust solvent, contact spray or
♦
grease on the cable eyes as the tightening torque via
the thread to the screwed connection is exceeded through
the missing static friction and leads to the fracture of the
screwed connection.
The grey grinding pads are suitable for slight contaminations
♦
and "soft surfaces".
The red grinding pads are suitable for heavy contaminations
♦
and "hard surfaces".
104
Rep. gr.97 - Wiring
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.