TROUBLESHOOTING
Problem
Mower is hard to push.
Mower vibrates
excessively and makes a
lot of noise.
Possible Cause
High grass and low
cutting height. Rear of
mower housing and blade
dragging in heavy grass.
The cutting blade is not
assembled securely.
The blade is not balanced.
The motor shaft is bent.
Raise the cutting height.
Tighten the blade bolts.
Sharpen and balance the blade
following instructions in this manual (see
page 29). Or replace the blade.
Stop the mower and remove the
batteries. Have the mower inspected
and repaired by an authorized service
center before restarting.
34
Solution