LawnMaster CLMF4819A Operator's Manual page 18

ASSEMBLY
ADJUSTING THE CUTTING HEIGHT
WARNING
Do not at any time make any adjustment to the lawn mower without first stopping the motor and removing the
safety key. Keep your feet away from the mower deck when adjusting its height.
When shipped, the rear wheels on the mower are set to a low-cutting position. Before using the mower for the
first time, adjust the cutting position to the height best suited for your lawn. The mower can be set to 6 cutting
heights between 1.4" (35 mm) and 3.4" (85 mm). Choose the proper cutting height according to the types and
conditions of the grass.
To set the cutting height:
1. To raise the cutting height, grasp the cutting height adjustment lever, then move it toward the back of the
mower and engage the lever in the desired cutting height position on the mower deck (Fig. 10).
2 To lower the cutting height, grasp the cutting height adjustment lever, then move it toward the front of the
mower and engage the lever in the desired cutting height position on the mower deck (Fig. 10).
18
Fig. 10