LawnMaster CLMF4819A Operator's Manual page 24

OPERATION
IPOWER MOWER MODE INDICATOR (20a) (Fig. 16)
1. By default, the motor power is set to "AUTO" and will automatically adjust to your lawn.
2. Push the press button repeatedly to cycle through the different motor power levels.
• Set the motor power to "1", if your lawn needs only light mowing.
• Set it to "2", if you are going to mow taller and thicker grass.
• Set it to "3" to utilize the maximum motor power for mowing the most stubborn grass.
IPOWER BATTERY METER INDICATOR (20b) (Fig. 16)
1. Push the press button to check on the battery status.
2. The number of lights lit will depend on the condition of the battery.
3. 4 lights indicate a fully charged battery, and 1 light indicates that the battery needs to be charged.
20a 20b
WARNING
A flashing LED on the mower mode control panel indicates that the current is too high. A flashing
LED on the battery indicates that the voltage is too low. In either case the motor will shut down
automatically. Do not continue to activate the On/Off switch if the motor has been shut down
automatically. The battery may be damaged.
Fig. 16
24