Table of Contents
Advertisement
Replace shelving in your preferred positions
10
FIRST USE
Shelf positions
We recommend placing the sliding shelves on
positions 2 and 4 for everyday cooking
To replace wire shelves
Guard rail
Check the shelf is positioned correctly, with the
guard rail at the back, then slide into place on
the side racks.
To replace sliding shelves
1 Grip the shelf at the front (making sure you
are holding the wire shelf and the sliding
frame together).
Guard rail
2 Make sure the shelf is level and facing the
Front bar
right way with the guard rail at the back.
3 Place the shelf on top of the side racks at
the desired height, hooking the rear tags
over the side racks on both sides.
4 Push the shelf all the way into the oven,
making sure the front tags are also
securely hooked over the side racks.
Ensure sliding shelves are positioned on top of
the side rack wires instead of between them.
When there is food in the oven, take care to
slide the shelves horizontally when extending
them. This will prevent the tags lifting off the
side racks and the shelf tipping over.
Advertisement
Table of Contents
