Fisher & Paykel OB24SDPTX1 Installation Manual

Fisher & Paykel OB24SDPTX1 Installation Manual

Hide thumbs Also See for OB24SDPTX1:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

BUILT-IN OVEN
OB24SDPT models
INSTALLATION GUIDE
US CA
591944A
07.19

Advertisement

Table of Contents
loading

Summary of Contents for Fisher & Paykel OB24SDPTX1

  • Page 1 BUILT-IN OVEN OB24SDPT models INSTALLATION GUIDE US CA 591944A 07.19...
  • Page 2: Safety And Warnings

    SAFETY AND WARNINGS WARNING! WARNING! To avoid hazard, follow these instructions carefully before installing or using this appliance. Electric Shock Hazard Please make this information available to the person installing the appliance—doing so could Failure to follow this advice may result in reduce your installation costs.
  • Page 3: Parts Supplied

    PARTS SUPPLIED Screws (2) Metal side shelves fixing nut (2) PRIOR TO INSTALLATION Ensure that: the countertop and oven cavity are square and level, and are the required dimensions the installation will comply with all clearance requirements and applicable standards and regulations the isolating switch will be easily accessible to the customer with the oven installed the electrician provides sufficient free length of power supply cable to reach from the bottom rear of the cavity to at least 1.5 metres in front of the bottom edge of the opening the cable may enter the cavity from the side, top or bottom, but top entry must be at the rear of the cavity...
  • Page 4: Product Dimensions

    PRODUCT DIMENSIONS FRONT PROFILE OB24SDPT MODELS PRODUCT DIMENSIONS INCHES A Overall height of oven 23 9/16 B Overall width of oven 23 7/16 C Overall depth of oven (excluding handle and dials) 22 1/4 D Height of chassis 22 5/8” E Width of chassis 21 7/8 F Depth of chassis...
  • Page 5: Cabinetry Dimensions

    CABINETRY DIMENSIONS PROUD INSTALL 5/8 - 13/16” (16-20mm) PROFILE PLAN FLUSH INSTALL OB24SDPT MODELS CABINETRY DIMENSIONS INCHES 5/8 - 13/16” A Minimum inside width of cavity 21 1/16 (16-20mm) B Overall width of cabinetry 23 5/8 C Minimum inside height of cavity 22 13/16 D Overall height of cabinetry 23 5/8...
  • Page 6 DISCARD PACKAGING RESPONSIBLY Remove the accessories box from the top of the oven and set aside. Recycle responsibly.
  • Page 7 CONNECT THE OVEN TO THE MAINS SUPPLY Nameplate location Junction box locations OB24SDPT MODELS VOLTAGE MAX. CURRENT DRAW MAX LOAD 208 V 16.6 A 3.5 kW junction box location for undercounter 240 V 19.4 A 4.6 kW installation junction box location for wall installation Connection methods...
  • Page 8: Secure The Oven To The Cabinetry

    SECURE THE OVEN TO THE CABINETRY IMPORTANT! Do not lift the oven by the door handle. Do not over-tighten the screws. Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult. Fisher & Paykel will not cover the costs of removing the oven, or of damage caused by this removal.
  • Page 9: Installer Checklist

    INSTALLER CHECKLIST TO BE COMPLETED BY THE INSTALLER TEST OPERATION: Ensure the oven is level and securely fitted to the cabinetry. Turn the power to the oven on. The display should light up. Set the clock following the instructions in the ‘User guide’. Check the lower trim is undamaged.
  • Page 10 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2019. All rights reserved. The product specifications in this document apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available.
  • Page 11: Four Encastré

    FOUR ENCASTRÉ Modèles OB24SDPT GUIDE D’INSTALLATION 591944A 07.19...
  • Page 12: Consignes De Sécurité Et Mises En Garde

    CONSIGNES DE SÉCURITÉ ET MISES EN GARDE MISE EN GARDE! MISE EN GARDE! Conservez ces instructions pour permettre aux inspecteurs locaux de les consulter. Risque de choc électrique Pour réduire les risques de danger, suivez attentivement ces instructions avant d’installer ou utiliser cet appareil. Le non-respect de cette consigne peut Remettez ces instructions à...
  • Page 13: Pièces Fournies

    PIÈCES FOURNIES Vis (2) Écrou de fixation des grilles latérales métalliques (2) AVANT L’INSTALLATION Assurez-vous que: la cavité du four et le comptoir sont de niveau et bien droits, avec les dimensions requises. l’installation sera conforme à toutes les exigences de dégagement et les normes et réglementations en vigueur. le client pourra accéder facilement à...
  • Page 14: Dimensions Du Produit

    DIMENSIONS DU PRODUIT DE FACE DE PROFIL MODÈLES OB24SDPT DIMENSIONS DU PRODUIT POUCES A Hauteur hors tout du produit 23 9/16 B Largeur hors tout du produit 23 7/16 C Profondeur hors tout du produit (excluant la poignée et les boutons) 22 1/4 D Hauteur du châssis 22 5/8”...
  • Page 15 DIMENSIONS DES ARMOIRES INSTALLATION SUPERPOSÉE 5/8 - 13/16” (16-20mm) DE PROFIL EN PLAN INSTALLATION ENCASTRÉE MODÈLES OB24SDPT DIMENSIONS DES ARMOIRES POUCES 5/8 - 13/16” A Largeur intérieure minimale de la cavité 21 1/16 (16-20mm) B Largeur hors tout des armoires 23 5/8 C Hauteur intérieure minimale de la cavité...
  • Page 16 METTEZ L’EMBALLAGE AU REBUT DE MANIÈRE RESPONSABLE Retirez la boîte d’accessoires du dessus du four et mettez-la de côté. Recyclez de manière responsable.
  • Page 17 RACCORDEMENT ÉLECTRIQUE À LA BOÎTE DE JONCTION Plaque signalétique Emplacements des boîtes de jonction MODÈLES OB24SDPT TENSION CONS. COURANT MAX. CHARGE MAX. Emplacement de boîte de jonction pour : installation 208 V 16.6 A 3.5 kW sous le comptoir 240 V 19.4 A 4.6 kW Emplacement...
  • Page 18 FIXEZ LE FOUR AUX ARMOIRES IMPORTANT! Ne soulevez pas le four par la poignée de porte. Ne serrez pas excessivement les vis. Ne scellez pas le four dans les armoires avec de la silicone ou de la colle. Cela rendrait difficile tout travail d’entretien futur.
  • Page 19: Liste De Vérification Finale

    LISTE DE VÉRIFICATION FINALE À ÊTRE REMPLIE PAR L’INSTALLATEUR FAITES UN ESSAI Assurez-vous que le four est de niveau et fixé solidement aux armoires. Activez l’alimentation du four. L’afficheur doit s’allumer. Réglez l’horloge en suivant les instructions dans le ‘Guide d’utilisation’. Vérifiez que la moulure inférieure n’est pas endommagée.
  • Page 20 FISHERPAYKEL.COM Droit d’auteur © Fisher & Paykel Appliances 2019. Tous droits réservés. Les caractéristiques de produit présentées dans ce livret s’appliquent aux modèles et produits spécifiques qui y sont décrits à la date de publication. Dans le cadre de notre politique d’amélioration en permanence de nos produits, ces caractéristiques peuvent être modifiées à...

This manual is also suitable for:

Ob24sdptOb24sdptb1

Table of Contents