Setting Power Saving Mode That Is Activated When The User Moves Away - Eizo RadiForce GX560 Installation Manual

4-2. Setting Power Saving Mode That Is Activated When
the User Moves Away
By setting the Presence Sensor, you can set the monitor to automatically enter the power saving mode
and display no images on the screen when the user moves away from the monitor. The monitor returns
from the power saving mode when the user moves closer to the monitor. The length of time to pass
before the monitor enters the power saving mode can be specified according to the operating
environment of the monitor or the user's movement.
Attention
• This feature is not available when "RadiCS SelfQC" is running.
• This feature is not available when "Power Save" is set to "Off".
Note
• At the time of shifting to the power saving mode, a message appears notifying the user of the transition.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "Presence Sensor", then
3. Select "On" or "Off", then select
4. When you have selected "On", configure the advanced settings.
Setting
Time
Sensitivity
Reset
Note
• The sensitivity becomes lower at high ambient temperatures. In this environment, you can set a larger
sensitivity value for your easier operation. On the other hand, the sensitivity becomes higher at low
temperatures, and accordingly a smaller sensitivity value is required.
16
Chapter 4 Using the Monitor for a Long Time
.
.
Setting range
5, 30 sec Specify the length of time to pass before the "No presence
1, 3, 5, 10, 15, 30, 45, detected." message appears after the user moves away from the
60 min monitor. If the message appears, the monitor enters the power
saving mode after approximately 20 seconds.
Level 5 A larger setting value allows the sensor to detect the user's
Level 4 movement more sensitively. This makes it difficult for the monitor to
Level 3 enter the power saving mode. On the other hand, a smaller setting
Level 2 value allows the sensor to detect only distinct movement of the user
Level 1 and consequently enables the monitor to enter the power saving
mode more easily. The Presence Sensor functions by detecting the
movement of heat using the sensor on the front of the monitor. The
sensitivity varies with the user's clothing and ambient temperature.
If you find transition to the power saving mode or recovery from it
occurs unexpectedly, change the setting value.
- Resets all settings related to the Presence Sensor to their default
values.
.
Description