Setting - AG Neovo SMQ-7501 User Manual

ADJUSTING THE LCD DISPLAY

4.3 Setting

Item
OSD Settings Language: Sets the OSD language.
Transparency: Adjusts OSD transparency.
• Off: Transparency is off.
• 25% to 75%: Transparency level is 25% to 75%.
Information OSD: Sets the period of time the information OSD is
displayed on the upper right corner of the screen.
The information OSD will appear on the screen when the input signal is
changed. The information OSD will remain on the screen if the setting is
set to Off.
OSD Turn off: Sets the period of time the OSD menu stays on the screen.
Power Settings Standby: Sets standby mode when DC is off.
Quick Start: The LCD display is fully on but the backlight is off. The
device can be woken up on signal detection.
Power Settings Switch on state: Selects the display status used for the next time you
connect the power cord.
• Power Off: The display will remain off when the power cord is connected
to a wall outlet.
• Force on: The display will turn on when the power cord is connected to a
wall outlet.
• Last status: The display will return to the previous power status (on/off/
standby) when removing and replacing the power cord.
OSD Settings
Power Settings
Auto Signal Detection
HDMI Settings
VGA Options
Advanced Options
Monitor Information
Factory Reset
HDMI
Function
30
Range
English
简体中文
French
Español
Deutsch
繁體中文
Off
25%
50%
75%
Off
On
0 to 100
Off
10 seconds
30 seconds
1 minute
5 minutes
10 minutes
Off
On
Power off
Force on
Last status