Notice for the LCD Display ........................... 8 CHAPTER 1: PRODUCT DESCRIPTION 1.1 Package Contents ..........................9 1.2 Installation ............................10 1.2.1 Installing the Stand (for SC-32E/SC-42E) ................. 10 1.2.2 Adjusting the Tilt (for SC-32E/SC-42E) ..................11 1.2.3 Wall Mounting ..........................11 1.3 Overview ..............................
Page 3
TABLE OF CONTENTS 3.8 Viewing Source Information ......................... 26 3.9 Using the Multimedia Functions ......................27 3.9.1 Navigating the Main Multimedia Menu ..................27 3.9.2 Viewing Photos .......................... 28 3.9.3 Listening to the Music........................ 30 3.9.4 Watching Movie ......................... 32 3.9.5 Viewing Text Files ........................
SAFETY INFORMATION Federal Communications Commission (FCC) Notice (U.S. Only) SC-32E / SC-42E This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INFORMATION WEEE Information for users applicable in European Union countries The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources.
Precautions PRECAUTIONS PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. Notice •...
Users who have already mounted the display on the ceiling or any other horizontal surface overhead are strongly advised to contact AG Neovo for consultations and solutions to help ensure a most pleasurable and fulfilling display experience.
PRECAUTIONS Cleaning and Maintenance Do not attempt to service the LCD display yourself, refer to qualified service personnel. Opening or removing the covers may expose you to dangerous voltage or other risks. Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time.
PRODUCT DESCRIPTION 1.2 Installation 1.2.1 Installing the Stand (for SC-32E/SC-42E) 1. Place the LCD display with the screen side down on a cushioned surface. 2. Attach the base to the stand and fix with the screws to join them tightly.
Note: Take measures to prevent the LCD display from falling down and lessen possible injury and damage to the display in case of earthquakes or other disasters. • Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All AG Neovo wall mount kits comply with VESA standard.
PRODUCT DESCRIPTION 1.3 Overview 1.3.1 Front View SC-32E SC-42E/SC-55E Display screen Remote control sensor: Receives command signals from the remote control. Power status indicator: Indicates the operating status of the display: • Lights green when the display is turned on.
PRODUCT DESCRIPTION 1.3.2 Control Buttons MENU HDMI CVBS AUDIO IN AUTO MENU: OSD menu ON/OFF. UP (p): Hot Key: Source Key When OSD menu is ON, navigate through adjustment icons or adjust a function. DOWN (q): Hot Key: Volume Key •...
PRODUCT DESCRIPTION 1.3.3 Rear View HDMI CVBS AUDIO IN AUDIO IN CVBS USB (FW / Multi Media Function): Connect USB storage for FW update / Media playback. HDMI input: Connect HDMI video / audio input source. DVI IN: Connect DVI-D video input source. VGA input (D-Sub): Connect VGA video input source.
PRODUCT DESCRIPTION 1.4 Remote Control POWER: Turn the monitor on or off. SOURCE (input source): Select the signal source from multiple input sources. MUTE: Turn the audio on and off. Number Buttons INFO: Information display. PICT MODE: Select preferred picture settings. SLEEP: Set the sleep timer.
PRODUCT DESCRIPTION 1.4.1 Inserting the Batteries in the Remote Control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (-) indications inside the battery compartment. 3.
PRODUCT DESCRIPTION 1.4.3 Operating Range of the Remote Control Point the top of the remote control toward the display’s remote control sensor (front side) when pressing a button. Use the remote control within the range which is shown in the following table. Operation Angle RC operational distance θ= 0º...
Chapter 2: Making Connections CHAPTER 2: MAKING CONNECTIONS CAUTION: Make sure that the LCD display is not connected to the power outlet before making any connections. Connecting cables while the power is ON may cause possible electric shock or personal injury. 2.1 Connecting the AC Power 1.
MAKING CONNECTIONS 2.2 Connecting Input Source Signals Input source signals can be connected with either of the following cables: • HDMI Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI connector of the computer.
MAKING CONNECTIONS 2.3 Connecting Audio Devices • Audio Input Connect one end of an audio cable to the AUDIO IN port of the LCD display and the other end to the AUDIO OUT port of the computer. AUDIO IN AUDIO •...
MAKING CONNECTIONS 2.4 Connecting a Video Device • CVBS IN Connect one end of a composite cable to the CVBS port of the LCD display and the other end to the CVBS port of the video device. • CVBS OUT Connect one end of a composite cable to the CVBS port of the LCD display and the other end to the CVBS port of the external display.
Chapter 3: Using the LCD Display CHAPTER 3: USING THE LCD DISPLAY 3.1 Turning on the Power 1. Plug the power cord to a power outlet or power supply. 2. Press the button on the control panel or on the remote control to turn the LCD display on. MENU AUTO Power Button...
USING THE LCD DISPLAY Press the AUTO button again to deactivate screen freeze. The screen freeze off message is displayed on the screen. FREEZE:OFF The screen image displays the elapsed real-time playback image when screen freeze is deactivated. 3.3 Adjusting the Volume Press the q button on the control panel or either of the VOL +/- buttons on the remote control to call out the volume adjustment menu.
USING THE LCD DISPLAY 3.4 Selecting a Source Press the p button on the control panel or the SOURCE button on the remote control to call out the source selection menu. MENU SOURCE Button AUTO Up Button INPUT SOURCE HDMI CVBS Press the p/q button on the LCD control panel or on the remote control to select the input source.
USING THE LCD DISPLAY The key lock message is displayed on the screen. KEYPAD LOCK • KEY LOCK (w/o POWER): Press the AUTO button for 5 seconds to enable/disable the KEY LOCK (w/o POWER) function. MENU AUTO AUTO Key The key lock message is displayed on the screen. KEYPAD LOCK 3.6 Selecting a Picture Mode Note: Selecting the picture mode is not available when the input source is USB.
USING THE LCD DISPLAY 3.7 Setting Sleep Time Note: Setting the sleep time is not available when the input source is USB. Press the SLEEP button on the remote control repeatedly to toggle between different sleep time intervals. The available options include “OFF”, “10MINUTES”, “20MINUTES”, “30MINUTES”, “60MINUTES”, “90MINUTES”, “120MINUTES”, “180MINUTES”, and “240MINUTES”.
USING THE LCD DISPLAY 3.9 Using the Multimedia Functions In multimedia mode, you can view photos, listen to the music, watch films, and display text files from an external USB storage. 3.9.1 Navigating the Main Multimedia Menu To switch the LCD display to the multimedia mode, do the following: 1.
USING THE LCD DISPLAY 5. After making the selection, press the AUTO button on the control panel or the OK button on the remote control to open the folder. 1 / 1 RETURN 6. Press the AUTO button on the control panel or the OK button on the remote control to browse the content of the folder.
Page 29
USING THE LCD DISPLAY Note: If you receive an error message while trying to open a photo, probably the file format is not supported. Refer to page 49. 3. By default, all available photos that are saved in the same folder on the USB storage are displayed in a playlist.
USING THE LCD DISPLAY • “ROTATE” (clockwise): Rotate the current photo clockwise. • “ROTATE” (counterclockwise): Rotate the current photo counterclockwise. “ZOOM IN”: Zoom in on the current photo 1/4x, 1/2x, 1x, 2x, 4x, or 8x. The zoom ratio is displayed •...
Page 31
USING THE LCD DISPLAY 2. Press the AUTO button on the control panel or the OK button on the remote control to playback the music file. RETURN folder music1.mp3 music2.mp3 music3.mp3 Note: If you receive an error message while trying to open the music file, probably the file format is not supported.
USING THE LCD DISPLAY • “PREV.”: Play the previous track. “NEXT”: Play the next track. • • “STOP”: Stop the playback and return to the browser view. • “REPEAT.. / REPEAT 1 / REPEAT ALL”: Select “REPEAT...” to play the track once and return to the browser view.
Page 33
USING THE LCD DISPLAY RETURN folder movie1.avi movie2.avi movie3.rmvb Note: If you receive an error message while trying to open the video file, probably the file format is not supported. Refer to page 49. 3. By default, all available video files that are saved in the same folder on the USB storage are included in the playlist.
Page 34
USING THE LCD DISPLAY “NEXT”: Play the next movie. • • “STOP”: Stop the playback and return to the browser view. “REPEAT.. / REPEAT 1 / REPEAT ALL”: Select “REPEAT...” to play the film once and return to • the browser view. Select “REPEAT 1” to repeat one and the same film continuously. Select “REPEAT ALL”...
USING THE LCD DISPLAY 4. Select the “ (STOP)” button on the control bar to return to the browser view. You can also press the MENU button (repeatedly if necessary) on the LCD display or the MENU or EXIT button (repeatedly if necessary) on the remote control to end the playback and return to the browser view.
USING THE LCD DISPLAY • : Move to the left or to the right to select control bar buttons. • “PREV ...”: Move to the previous page in the document. “NEXT ...”: Move to the next page in the document. •...
Chapter 4: On Screen Display Menu CHAPTER 4: ON SCREEN DISPLAY MENU 4.1 Using the OSD Menu Operation Menu Navigation Control Panel Remote Control Display the main menu screen. MENU Press MENU. Press VIDEO PICTURE MODE STANDARD BRIGHTNESS CONTRAST SATURATION SHARPNESS COLOUR TEMPERATURE NEUTRAL...
ON SCREEN DISPLAY MENU 4.2 OSD Menu Tree Main Menu Submenu Reference VIDEO PICTURE MODE Refer to page 39. BRIGHTNESS CONTRAST SATURATION TINT SHARPNESS COLOUR TEMPERATURE ADVANCED CONTROL AUDIO SOUND MODE Refer to page 44. BALANCE BASS TREBLE VIRTUAL SURROUND AUTO VOLUME SETTING LANGUAGE...
Chapter 5: Adjusting the LCD Display CHAPTER 5: ADJUSTING THE LCD DISPLAY 5.1 VIDEO Menu 1. Press MENU on the control panel or on the remote control to call out the OSD window. 2. Press p / q on the control panel or the remote control to select and then press AUTO on the control panel or OK/ u on the remote control to enter the AUDIO menu.
Page 40
ADJUSTING THE LCD DISPLAY Item Function Operation Range CONTRAST Adjusts the difference between the black 1 Press AUTO on the 0 to 100 level and the white level. control panel or OK on the remote control. 2 Press p q on the control panel or on the remote control to adjust the value.
Page 41
ADJUSTING THE LCD DISPLAY Item Function Operation Range COLOUR Provides several colour adjustment Press AUTO on the COOL NEUTRAL TEMPERATURE settings. control panel or OK WARM on the remote control COLOUR TEMPERATURE NEUTRAL USER repeatedly. RED129 GREEN119 BLUE115 Colour temperature can be set to: •...
Page 42
ADJUSTING THE LCD DISPLAY Item Function Operation Range ADVANCED • “DCR (Dynamic Contrast Ratio)” - 1 Press AUTO on the CONTROL Automatically adjust the backlight range control panel or OK according to the display screen, such as on the remote control. when watching movies.
Page 43
ADJUSTING THE LCD DISPLAY Item Function Operation Range • “H.POSITION (Horizontal Position)” - 1 Press p q on the AUTO ADJUST 0 to 100 Moves the screen image to the left or control panel or on right. the remote control to select an item.
ADJUSTING THE LCD DISPLAY 5.2 AUDIO Menu 1. Press MENU on the control panel or on the remote control to call out the OSD window. 2. Press p / q on the control panel or the remote control to select and then press AUTO on the control panel or OK/ u on the remote control to enter the AUDIO menu.
ADJUSTING THE LCD DISPLAY 5.3 SETTING Menu 1. Press MENU on the control panel or on the remote control to call out the OSD window. 2. Press p / q on the control panel or the remote control to select and then press AUTO on the control panel or OK/ u on the remote control to enter the SETTING menu.
Page 46
ADJUSTING THE LCD DISPLAY Item Function Operation Range POWER SAVING Enables or disables power saving mode. Press AUTO on the control panel or OK Note: The amount of time for the display on the remote control to enter power saving varies depending repeatedly.
OK/ u on the remote control to enter the INFO menu. INFORMATION INPUT: HDMI RESOLUTION: 1441x900 HORIZONTAL FREQ: 55.814KHz VERTICAL FREQ: 59.8Hz F/W VERSION: SC-32E V1.10.5 3. Review current input source, resolution, horizontal and vertical frequencies, and firmware version.
Chapter 6: Appendix CHAPTER 6: APPENDIX 6.1 Warning Messages When any of these warning messages appear, check the following items. Warning Message Cause Solution √ Change the resolution or the The resolution or the refresh rate of INVALID FORMAT the graphics card of the computer refresh rate of the graphics is set too high.
CHAPTER 6: APPENDIX 6.2 USB Multimedia Formats and Resolutions Note: ♦ The multimedia formats and resolutions in this section apply to the multimedia content on USB 2.0 compatible USB storage device. Picture Picture 3840 x 2160 640 x 480 2400 x 1800 320 x 240 1024 x 768 176 x 144...
CHAPTER 6: APPENDIX 6.3 Timing HDMI 720 x 400p @ 70 Hz 720 x 400p @ 70 Hz 1920 x 1080p at 50 Hz 640 x 480p @ 60 Hz 640 x 480p @ 60 Hz 1920 x 1080p at 60 Hz 640 x 480p @ 72 Hz 640 x 480p @ 72 Hz 1920 x 1080i at 50 Hz...
APPENDIX 6.4 Troubleshooting Problems Possible Cause and Solution No picture. • Check if the LCD display is turned ON. • Check if the power cord is properly connected to the LCD display. • LED indicator is OFF. • Check if the power cord is plugged into the power outlet. •...
To transport the LCD display for repair or shipment, place the display in its original packaging box. 1. Remove the base stand (for SC-32E/SC-42E). a. Remove the screws securing the base stand to the base mount on the LCD display.
Page 54
5. Place the LCD display down in the box. 6. Place the upper foam cushions on the top of the LCD display. 7. Place the accessories on the designated area (if necessary). 8. Close and tape the box. SC-32E SC-42E SC-55E Note: •...
Need help?
Do you have a question about the SC-32E and is the answer not in the manual?
Questions and answers