Table of Contents
Advertisement
Yale Z-Wave Plus ™ Product Info
Manufacturer ID: ASSA ABLOY (0x0129)
Z-Wave™ Device Type: Door Lock Keypad
Z-Wave™ Role Type: Listening Sleeping Slave (LSS)
Network Operations
Enroll/Add device to network (SmartStart)
SmartStart enabled products can be added into a Z-Wave™ network by scanning
the Z-Wave™ QR Code present on the product with a controller providing
SmartStart inclusion. No further action is required and the SmartStart product will
be added automatically within 10 minutes of being switched on in the network
vicinity.
•
Open the Z-Wave™ system's smart home app via smartphone or tablet and
follow the in-app prompts to add a new device.
•
SmartStart works when the Z-Wave™ system has the DSK saved and one of
the following are true:
o The lock has the minimum Lock firmware version AND is in a factory-
reset state:
NTT612/622: v3.2.58
▪
o An internal key has already been established.
Enroll/Add device to network (Classic Inclusion Mode)
•
Enter the 4–8-digit Master PIN code followed by the
•
Press the
•
Press the
•
Scan the QR code, if prompted, or...
•
Enter the first five (5) digits of the DSK if prompted.
Un-enroll/Remove device from network (Exclusion Mode)
•
Enter the 4–8-digit Master PIN code followed by the
•
Press the
•
Press the
key followed by the
key followed by the
key followed by the
key followed by the
key.
key.
key.
key.
5
key.
key.
Advertisement
Table of Contents
