Table of Contents
Advertisement
6 Maintenance and Calibration
Press <Esc> to cancel.
Press <Home> to reset to factory setting.
4. After proceeding through the instructions, the legend SPAN
SETTING INSTRUCTION will appear.
Reference Source in position (dial indicator, magnetic base),
move the post up with the pushbutton (9) on the front panel of the
equipment and match the Panel Meter reading to the Reference
Source reading using the following keys:
<Up Arrow>
<Dn Arrow>
<Pg Up>
<Pg Dn>
<Home>
<Enter>
<Esc>
man-stc-42115-V15-27
Screen No. 7
increments reading slowly (fine adj.)
decrements reading slowly
increments reading faster (coarse adj.)
decrements reading faster
resets to factory setting
done
abort (keep current setting)
Sand Rammer
Place the proper
45
Advertisement
Table of Contents
