Table of Contents
Advertisement
The equipment consists of:
1.
A hydro-pneumatic press that applies a load to the specimen
being tested. The system includes a manual regulating valve
to control the rising speed of the press.
2.
A furnace to heat the specimen. The furnace temperature is
regulated by an accurate digital controller and indicator. The
furnace is moved up and down over the prepared specimen
by a pneumatic cylinder.
3.
A coolant pump unit that pumps coolant oil through a coolant
plate on the electronic load cell to keep cools the load cell.
4.
A digital timer that controls the heating time of the specimen.
At a specified time, the hydro-pneumatic press compresses
the specimen.
5.
An electronic load cell that displays digitally the resistance
value.
6.
A displacement sensor that measures the positive and/or
negative strain of the specimen.
7.
A computer with monitor and keyboard that stores and
processes the test data.
Power: 110/220 V, 50/60 Hz on request, 2 Kw
Pneumatic Connection: Filtered, lubricated and regulated air from 5 -
5.4 bar (72-80 PSI) Filtering, regulating and lubricating air equipment
is supplied.
Specifications
Length
Width
Height
Weight
12
Short Description & Specifications 3
High Temperature Compression Tester
1050mm (
)
41.5"
430mm (17")
900mm (35.5")
126 kg (278 lbs.)
Sand Rammer
man-stc-42115-V15-27
Advertisement
Table of Contents
