Simpson 42115 Operating Instructions Manual page 36

1. From the HTCD Tester Main Menu select the S&D Test by
using the keyboard arrow keys and depress ENTER.
2. The HTCD Strength & Deformation Test Control Center
screen will be displayed. (Screen # 3)
3. Select the START command with the arrow keys on the
keyboard and press ENTER.
4. Type in the temperature in the Test Parameters window, this
be the same temperature that was selected on the
temperature controller. Press enter on the keyboard.
30
Operating Instructions 5
Screen No. 3
Sand Rammer man-stc-42115-V15-27