Simpson 42115 Operating Instructions Manual page 12

This label is located on the left front panel of the High Temperature
When operating the High Temperature Compression Tester, the sand
specimen may break before, during or after the test and sand may
blow-off to the surroundings and get into the eyes and may irritate
and/or damage the eye. Follow Lockout and Tagout procedures
before servicing.
READ AND UNDERSTAND ALL SERVICE MANUAL
This label is located on the left front panel of the High Temperature
Before operating and/or performing any maintenance or repair on
Simpson Technologies Corporation designed and/or manufactured
equipment, it is required that all personnel read and understand the
entire Operating Instructions manual. If any questions exist, you must
contact your Supervisor or Simpson Technologies Corporation before
taking further action.
servicing.
6
WEAR SAFETY GOGGLES
(STC #205308)
Compression Tester
INSTRUCTIONS
(STC #214081)
Compression Tester
Follow Safety System Procedures before
Sand Rammer
Safety 2
man-stc-42115-V15-27