Table of Contents
Advertisement
2 Safety
This label is located on the back panel of the unit by the pneumatic
With pneumatic pressure present, disconnecting or cutting the
pneumatic tubing will release the pressure contained within the tubing.
Blown-out air with or without solid particles in the air stream may get
into the eyes and may irritate or damage the eye. Follow Lockout and
Tagout procedures before servicing.
This label is located on the left front panel of the High Temperature
The High Temperature Compression Tester sliding furnace and
adjoining parts are extremely hot. Contact may result in serious burns
to skin. DO NOT TOUCH unless protective gloves are worn. Follow
Lockout and Tagout procedures and allow surface to cool before
servicing.
man-stc-42115-V15-27
EXPLOSION / RELEASE OF PRESSURE
(STC #217945)
tubing connections.
EXPLOSION / RELEASE OF PRESSURE
(STC #217945)
Compression Tester
Sand Rammer
5
Advertisement
Table of Contents
