Table of Contents
Advertisement
14. The REMARKS function allows for information pertaining to
the test to be entered that will then be printed with the other
test data. Press enter several times until the word Ready
appears in the lower right of the remarks window. Then go to
Report for printing.
15. The CLEAR function allows for the present test data to be
cleared and the next test can be started.
16. The QUIT function ends the current test and returns the user
to the Main Menu screen.
17. After the options mentioned above have been selected, or not
selected, use the tongs to remove the specimen that was just
tested and the lentils and place into the tray that is located at
the bottom of the lower pedestal for additional cooling. Do not
touch the specimen or lentils for at least ½ hour. These can
remain in the tray while performing other tests.
26
Operating Instructions 5
Sand Rammer
man-stc-42115-V15-27
Advertisement
Table of Contents
