Table of Contents
Advertisement
Location and Function of Parts and Controls
(a0'on)oosza-aN
©
open it.
Front
ning the front panel reveals the ink ribbon
Paper cover (11)
Opening
P
cartridge, paper tray and paper cover
Paper is ejected onto this cover.
®@ ©
Paper tray (11, 18)
Load paper into this tray.
When the front panel is open
STOP button
Press to stop printing midway.
=]
[1] POWER switch
[5] RIBBON indicator
Press to switch the unit on or off. The POWER
Lights when a problem for ink ribbon
lamp lights green when the power is on.
cartridge occurs.
(2] Top cover
[6] PAPER indicator
Do not open this top cover. Only for service
Lights when a problem for paper occurs.
personnel.
The printer allows you to check the printer
[3] PRINT indicator
operating condition according to the lighting
Lights while printing.
conditions of the PRINT indicator, ALARM
Blinks while the printer is receiving data.
indicator, PAPER indicator and RIBBON
indicator.
[4] ALARM indicator
For details, see "Indicators on the Front Panel"
Lights in case of paper jamming or occurrence
on page 25.
of any other problem.
{J Parallel interface connector (Amphenol 36-
[2] "AC IN connector
pin) (12, 13)
Used to connect the printer to a wall outlet
Used to connect a Windows or Macintosh
with the supplied power cord.
computer via the parallel centronics interface
(IEEE-1284), using the parallel data cable (not
supplied).
od,
tn
8 | Introduction
Introduction
| 9
Advertisement
Table of Contents
