Sony UP-D2500 Service Manual page 47

Digital color printer
Hide thumbs Also See for UP-D2500:
Table of Contents

Advertisement

Sensor A (bar code sensor, low level value)
[Pl
ADDR4Fh
DATAOAh| <EXEC>
<Data check> [P1] [ADDR30h |
Sensor B (bar code sensor, threshold
[Pil
ADDR4Fh
DATA**h
level value)
DATAOBh| <EXEC>
<Data check> [P1] [ADDR31h
IDATA**h
Sensor C (paper jamming sensor, light emission level value)
[Pi] [ADDR4Fh
<Data check> [PI
[DATAOCh| <EXEC>
ADDR32h
DATA**h
Sensor D (paper jammin
g sensor, high level value)
[Pi] [ADDR4Fh
DATAODh] <EXEC>
<Data check> [PI
Sensor E (paper jammi
[Pi
<Data check>
ADDR34h
ng sensor, threshold level value)
Sensor F (paper jammi
ADDR33h | [DATA**h
ng sensor, low level value)
ADDR4Fh]
[DATAOEh] <EXEC>
[DATA**h|
[Pi] [ADDR4Fh] [DATAOFh] <EXEC>
DATA**h
<Data check>
ADDR35h
[Display] (Example) 84 f5 Of 80
(One-byte data is displayed using a HEX code. In each sensor, data is
<Contents>
<Procedure>
ADRS5FH
<Data check>
ADR40H
UP-D2500(UC,CE)
7
66
arranged in the order of "light-emitting level value",
"high-level value", "low-
level value", and "threshold value" from the top. For the data described above,
the LED voltage value is 84, and the high value of PHTR is f5. The low value
of PHTR is Of, and the threshold value is 80.)
{How to convert the data displayed using a HEX code into a sensor voltage value]
¢ The displayed data indicates the value obtained when the voltage levels
(0 through 5V) of each sensor are equally divided into 1/256. Therefore, the
voltage value that the HEX code indicates can be obtained from the
calculation below.
(Example) When the HEX code is h 'b3 h 'b3 = d' 179 (< Converts the
hexadecimal display into a decimal display.)
5.0(V) x 179 / 256 = 3.4(V)(< Voltage value of sensor indicated
by h 'b3)
14. Error History Information
Mechanical deck error history information.
Reads information on errors which occurred during mechanical operations.
The latest 8 errors are preserved.
The contents correspond to the NG_CODE1 data.
SPEER
[ADR4IE
[ADR&ZH,
[ADR&GE
[ADR&SH|
[ADR4GH
[ADR&TE
<EXEC>
DATA**H
Data 0=Latest error information
Data 1
DATA**H
Data 2
[DATA**H] Data 3
Data 4
Data 5
DATA**H
Data 6
DATA**H
Data 7
3-17

Advertisement

Table of Contents
loading

Table of Contents