Table of Contents
Advertisement
10. Bar code automatic adjustment
<Contents>
<Procedure>
Automatic adjustment of the light emission level of the bar code sensor,
threshold level.
Is the paper feed motor operating?
Are the harness and mechanical parts assembled correctly?
(1) Close the platen cover and insert the ribbon cartridge.
(2)
<EXEC>
¢ OK : Bell rings once
¢ NG : Bell rings three times
<Data check>
11. Ribbon code automatic adjustment
<Contents>
<Procedure>
Light emission levels of the RBN_CDO sensor, RBN_CD1
sensor.
Automatic adjustment of the threshold level.
Is the ribbon motor operating?
Are the harness and mechanical parts assembled correctly?
(1) Close the platen cover and insert the ribbon cartridge.
(2)
<EXEC>
* OK : Bell rings once
* NG : Bell rings three times
<Data check>
ADRIBH|
[DATA**H
12. Print automatic adjustment
<Contents>
<Procedure>
Automatic adjustment of light emission level of the PP_JAM sensor, threshold
level.
Is printing inconsistent due to the thermal head and gear?
Is the paper pass system normal?
Are the harness and mechanical parts assembled correctly?
(1) Close the platen cover and insert the ribbon cartridge and paper tray.
(2)
<EXEC>
¢ OK : Bell rings once
* NG : Bell rings three times
<Data check>
ADR39H]
[DATA**H
UP-D2500(UC,CE)
3-15
Advertisement
Table of Contents
