Table of Contents
Advertisement
NG command list 3
A way of looking the list: In case h ' 24 = 0010 0100(Refer to HEX code converting as binary
code.)
NG sensor becomes second bit(LOAD FG ) and fifth bit(RIBBON CD0 ).
NG_CODE4
bit 6
SE-423 board/D302
* Connector is removed./ Part is defective.
RIBBON_CDO_ERROR
SE-423 board/D301
SE-424 board/Q350
¢ Optical axis is out of place.
¢ Connector is removed./ Part is defective.
¢ Optical axis is out of lace.
SE-425 board/PH401
| bits | PP_JAM_ERROR
SE-422 board/PH250
¢ Connector is removed./ Part is defective.
BARCODE_ERROR
bit 2
LOAD_FG_ERROR
SE-418 board/PH101
¢ Connector is removed./ Part is defective.
RIBBON_FG_ERROR
SE-417 board/PH1
* Connector is removed./ Part is defective.
A way of looking the list: In case h ' 42 = 0100 0010(Refer to HEX code converting as binary
code.)
NG sensor becomes first bit(LOAD TMG sensor ) and sixth bit(JAM sensor ).
NG_CODES5S
Renna NOt] __GonlansofNG '| __BoardREF_|——~=~Chwckiwom |
neo | bité | PPYAMERROR
|
SE-422 board/PH250_| There is a print paper in the mechanical deck. _|
Ribbon end
There is no ribbon cartridge.
| bits | NO_PAPER
—s—_—_—_—_—i|_- SE-426 board/PH451
There is no print paper.
[ bit2 | REMOVE PRINTS
___|_SE-428
board/PH550__|EJCT_TMG sensor becomes ON.
SE-427 board/PH501
| bito | CLOSE_COVER
SE-429 board/S150
NG_CODE6
* Connector is removed.
* Part is defective.
* There is no sensor sensitive by mistaken
| bits | TRAYPOSi
|
SE-429 board/PH602 __| assembling the mechanism.
3-20
UP-D250)(UC,CE)
Advertisement
Table of Contents
