Rtmp Push - RGBlink TAO 1Mini-N Quick Start Manual

Find the NDI source to be decoded by swiping the screen and then click
to decode and output.
Note: NDI encoding mode and decoding mode cannot work simultaneously.

RTMP Push

Long press RTMP Push icon in Output Area and you can check
RTSP/RTMP/SRT stream address by click . Then the interface will
display the RTSP/RTMP/SRT stream address of TAO 1mini, shown as
below.
Users can modify IP address of TAO 1mini in Network Settings and then
the RTMP/RTSP/SRT stream address will be modified synchronously.
Users can also click Edit Icon at the bottom to set the Resolution, Bitrate
and Display Mode.