Table of Contents
Advertisement
EN83CTLA SNMP Card
User Manual
6.
7.
8.
Issue 04 (2024-01-30)
Figure 5-16 Adding an SNMPv3 user
NO TE
Set User name, MD5/SHA password, and DES/AES password to any character strings
that meet the system requirements. Note that MD5/SHA password and DES/AES
password must be set to different values. Record the settings.
After setting the parameters, click Confirm.
Click Add under SNMP Trap.
Figure 5-17 Adding SNMP trap
Set Trap Target Address and Trap Port, set SNMP Version to SNMPv3, and
specify SNMPv3User Name. Set Trap Target Address to the IP address of the
NMS server and set Trap Port to the port defined by the user.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Device Commissioning
45
Advertisement
Table of Contents
