Table of Contents
Advertisement
EN83CTLA SNMP Card
User Manual
Table 3-3 Indicator description
Indicator Color
Green
Step 1 Install the SNMP card in the optional card slot of the UPS and power on the UPS.
Step 2 Pull the 4G module enclosure backwards, and then install the SIM card.
Figure 3-8 Installing a SIM card
(1) SIM card installation position
Step 3 Connect the 4G module to the USB port of the SNMP card using a USB2.0
extension cable. Install the magnetic 4G module on the nearby cabinet.
Figure 3-9 Installing a 4G module
Issue 04 (2024-01-30)
Indicator Status
Blinking slowly: at an interval
of 2s, on for 0.2s and off for
1.8s alternately
Blinking slowly: at an interval
of 2s, on for 1.8s and off for
0.2s alternately
Blinking fast: on for 0.125s
and off for 0.125s
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation and Basic Settings
Description
The backhaul module
has no service, the
service is restricted, or
the network is being
searched.
The backhaul module
has successfully
registered with the
network or is in the
standby state.
The backhaul module
has set up a dialup
connection or data is
being transmitted.
11
Advertisement
Table of Contents
