29
11
Recheck
Level Line
Redo the installation if the car
seat is not reclined correctly.
Note: Only if necessary, you may
need to place a tightly rolled
towel(s) or foam pool noodle(s) un-
der the front of the car seat's base
to help get the correct recline angle
for the
Check often to make sure padding
is still in place and the belt is tight.
Finished!
Check the tightness of the
install often to make sure it
has not loosened.
Rear-Facing
Rear-Facing Level
Line.
LATCH: Lower Anchor Install
Before you begin installing the car seat
into your vehicle, did you check:
Your child's weight and height?
See page 24.
Your child's fi t? See page 9.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
Remove Lower Anchor Belt
from Storage Attachments
Or if the lower anchor belt was
used Forward-Facing, remove it
from the
so both connectors are on the same
side of the car seat as shown.
2
Locate
30
Forward-Facing Belt Path
Rear-Facing Belt Path
continued on next page
Need help?
Do you have a question about the Pria Sport and is the answer not in the manual?