Page 1
This quick start guide helps you start using your Maxi-Cosi car seat right away. However, please read the complete instruction manual and all labeling on the car seat. They include important warnings and additional safety information.
Page 2
Car Seat Use Requirements Rear-Facing Vehicle Install WARNING There are 2 methods for install. Choose only one: Measure your child’s weight and height (do not guess) before choosing the car seat’s mode. This Quick Start Guide is set up to help you get started installing either the 1st or 2nd mode: Rear-Facing or Forward-Facing.
Page 3
Check Rear-Facing Route Belt into Rear-Facing Belt Path Level Line For children who cannot sit up unassisted, the level line must be parallel with the ground. Vehicle Belt For children who can sit up unassisted, you may rotate the child restraint to be more upright in Position 2.
Page 4
Check Belt Tightness Secure Car Seat in Vehicle Hold at the Rear-Facing Belt Path. Push and pull from side to side. It should not move more Buckle Vehicle Belt than 1 in. (2.5 cm). Recheck Rear-Facing Level Line Redo the installation if the car seat is not reclined correctly for your child.
Page 5
Forward-Facing Vehicle Install There are 2 methods for install. Choose only one: Loosely Attach Tether Hook to Vehicle’s Tether Anchor Check vehicle owner’s manual for specific location. Vehicle Belt + Tether LATCH: Lower Anchor up to 65 lb (29 kg) Belt + Tether Locate Forward-Facing up to 40 lb (18 kg)
Page 6
Tighten Tether Route Belt into Forward-Facing Belt Path Vehicle Belt Secure Car Seat in Vehicle Lower Anchor Belt Connector with the adjuster closest to it goes through the Forward- Buckle Vehicle Belt Facing Belt Path Adjuster opening as shown. Finished Lower Anchor Belt Routing Adjuster Attach Lower Anchor...
Need help?
Do you have a question about the Pria and is the answer not in the manual?
Questions and answers