KYOWA WGA-680A Instruction Manual page 12

6. CC-Link SETTINGS
NOTE
DA output and control output are stopped when the instrument is in function selection mode(F-** is displayed)
or during function setting.
When applying a load, pay attention to overload and control status.
For details of functions, see "4" in the WGA-680A INSTRUMENTATION AMPLIFIER INSTRUCTION
MANUAL. To set the CC-Link, go to the FUNCTION SELECTING mode [F-18] (CC-Link).
FUNCTION
SELECTING mode
F-18
CC-Link
7. BUFFER ADDRESS OF PLC
When the Number of occupied stations is "2" or "4", make sure each PLC (master) has unique address.
The buffer address, assigned to the remote device (WGA-680A), varies with the Station number as follows.
Station Remote input: RX
number Address
1 00E0
H
2 00E2
H
3 00E4
H
4 00E6
H
Key operation and product movement in SETTING mode
Display the following items(1), (2), (3)
(1) Number of occupied stations
0: 1 station
1: 2 stations
2: 4 stations (initial value)
(2) Communication speed
0: 10 Mbps (initial value)
1: 5 Mbps
2: 2.5 Mbps
3: 625 kbps
4: 156 kbps
(3) Station number
Range: 01 to 64 (initial value: 01)
Select and change values in items (1), (2), and (3) and
press the SET key.
Remote output: RY
Input RX Address
RX0000 0160
H
RX0020 0162
H
RX0040 0164
H
RX0060 0166
H
(1) (2) (3)
Remote register: M → R
Output RY Address
RY0000 01E0
H
RY0020 01E4
H
RY0040 01E8
H
RY0060 01EC
H
M: Master (PLC)
9
Functional description
Selects the number of occupied
stations as the remote device
station.
The address map varies with the
number of occupied stations.
The range of the Station number
varies with the Number of
occupied stations.
01 to 64
Number of occupied stations: 1
01 to 63
Number of occupied stations: 2
01 to 61
Number of occupied stations: 4
Remote register: R → M
Resistor M→R Address
RWw0000 02E0
RWw0004 02E4
RWw0008 02E8
RWw000C 02EC
R: Remote (WGA-680A)
Resistor R→M
RWr0000
H
RWr0004
H
RWr0008
H
RWr000C
H