BRAYER BR1257 Instruction Manual page 7

• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When the unit is used in
the mains with 60 Hz frequency, it does not need any
additional settings.
• Before using the unit wash the whisk attachment (7),
the chopping bowl (10), the chopping knives (9), the
cup (11) and the cappuccinatore attachment (12)
with warm water and neutral detergent, rinse and dry
them.
• Wash only the lower part of the blender attachment
(1), clean the outer surface with a slightly damp cloth.
Never immerse the blender attachment (1) into water
or any other liquids completely.
• Wipe the motor unit, the chopper geared lid (8) and
the whisk attachment gear (6) with a soft, slightly
damp cloth and then wipe them dry.
CAUTION! Do not immerse the blender attachment (1),
the motor unit, the chopper geared lid (8), the whisk
attachment gear (6), the power cord and the power plug
into water or any other liquids.
USING THE BLENDER ATTACHMENT
Continuous operation time of the blender
attachment (1) should not exceed 30 seconds. Stop
using for at least 3 minutes between two operation
cycles.
• Use the blender attachment (1) for making sauces,
mayonnaise, fruit puree, baby food, mixing various
ingredients and for processing fruit and vegetables
containing enough liquid.
• Before installing the blender attachment (1), make
sure that the power plug is not inserted into the
mains socket.
• Insert the blender attachment (1) into the motor unit
until the release buttons (2) clicking, make sure that
the attachment is fixed properly .
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl
with food that you want to chop/mix; you can also put
the food in the measuring cup (11).
ATTENTION! Hold the motor unit with the blender
attachment (1) vertically while processing the food
(pic.1).
• To switch the unit on, press and hold down the button
(4) « ». Use this operation mode for mixing liquid
products.
• When you press and hold the button (4) « » you
can control the attachment rotation speed by turning
the control knob (5). Use this operation mode for
processing of liquid and solid products.
• For operation at the maximal rotation speed, press
and hold down the button (3) «TURBO».
EN 7