Advertisement
● On the home screen, press and hold "
same time for two seconds to enter the query interface, and
u00-u03 indicates ODUs, n00-n63 indicates IDUs, and CC
indicates the wired controller. Press "
the parameter code. Press "Swing" to enter the parameter
query page.
● Press "
" to exit the query page. The parameter query page
automatically closes if no button is pressed within the next
60 seconds
● Press "
" or "
ters can be queried cyclically.
● On the top of the query page, the "Timing area" displays the
check list serial number, and the "Temperature area"
displays the check list parameters.
● Check list query information is listed as follows: Information
may vary depending on unit model. Check list of parameters
applies to VRF units and mini VRF units.
" to query the parameters, and the parame-
50
" and "
" at the
" and "
" to switch
Advertisement
