Table of Contents
Advertisement
Contents
27.5 Install tilt back plate (41) on the mechanism housing (1) and secure with four screws (13).
27.6 Align the tilt brake bell crank (8) and push tilt brake pivot pin (7) into position.
27.7 Install the push rod/spring fork assembly (14 -19).
27.8 Position the tilt brake shoe assembly (39) and spring (40) in the tilt back plate (41) and push in
the tilt brake shoe axle (11) to secure.
Balance mechanism installation
28
To install the balance mechanism, proceed as follows:
28.1 Install balance mechanism assembly on base assembly.
NOTE: An extended 4 mm AF spherical-ended hex wrench (Vinten Part No. 3354-931TL) is
required to install the support caps.
28.2 Referring to
Loctite 222E. Ensure correct length screws are used in appropriate positions. Tighten the vertical
screws (24, 25) until just gripping, tighten the horizontal screw (1) fully, then tighten the vertical screws
fully.
28.3 Referring to
Loctite 222E. Ensure correct length screws are used in appropriate positions. Tighten the vertical
screws (26, 27) until just gripping, tighten the horizontal screw (29) fully, then tighten the vertical screws
fully.
28.4 Ensure tilt brake is released, then operate balance mechanism through its range. Check for
freedom of movement, knocks or other irregularities.
Centre lock
29
To assemble the tilt cover/centre lock assembly, proceed as follows
29.1 If removed, install dowel (35) and two Spirol pins (12) in tilt unit cover (33).
29.2 Install centre lock release lever (34) on dowel (35).
29.3 Install spring (32) in centre lock plunger (30). Install plunger in tilt unit cover (33) and insert dowel
(31) in plunger to retain spring (32).
29.4 Install centre lock release lever spring (36), engaging hook in centre lock release lever (34) and
securing leg to tilt unit cover (33) with screw (37), using Loctite 222E.
Fig
6.3, secure LH support cap to base with three screws (1, 24 and 25) using
Fig
6.5, secure RH support cap to base with three screws (26, 27 and 29) using
First
Previous
Next
Page
Page
Page
(Fig
6.10):
Previous
View
46
Advertisement
Table of Contents
